INSTALLING THE FUJITSU S510, S1500 TITLE SCANNER

Fujitsu S510, S1500

Install the scan snap manager only, then attach the scanner.

I did the minimum install but you might want to also install the full version of adobe acrobat that comes with the scanner.

During the install you will be prompted for:

• the scan method setting, I chose face down (recommended).
• the notify scanning result setting, I chose off

Make sure you are not using the quick menu – uncheck it and double click on the S for scansnap manager and then make the following changes in the scansnap Manager.

In Scan Snap manager, the settings for the jpegger documents will be:

• application – scan to file
• save – choose a temporary work directory on the network that is visible to jpegger. Nothing else can be in this directory.

**This is in the file name format option

I set the file naming convention to YYYYMMDDhhmmss

If you are running version 2 of jpegger, you can scan to pdf (recommended)
scanning – set color mode B&W
file options – change to pdf

If you are running version 1 of jpegger, you must scan to jpg scanning

• change color mode to color (this is required for jpg files)
• file options – change to jpg
• compression – set to 4 or 5

In the jpegger service on the server, go into options. Add a camera, configure it as a directory and enter the same directory name used in Scan Snap manager.
To configure the scanner in Scrap Dragon, go to back office; maintenance; setup; local computer options; imaging; enter the camera name as the ‘documents’ (formerly license) camera. That concludes the setup & configuration.
The process is simple. Insert the documents face down in the scanner, press the scan button on the scanner. When the scanning is done, go into Scrap Dragon and press Save Scans. The ‘Save Scans’ option is available in 1. Scrap Buying, Ticket Info, 2. Auto Add to Inventory (VIN entry), 3. Pay ticket by number and 4. Pay tickets by number.